Coater equipment is divided into in-machine type and out-of-machine type in the process of paper machine. It is divided into single layer coating and double layer coating according to the number of coating. In-machine coating is equipped with a coater on the paper machine to make papermaking and coating continuous. Double-coated paper has better printability than single-layer coated paper, and can improve the quality of coated paper.
There are mainly three types of coater used for coating operations: roll coater, air doctor coater and blade coater.Main production: kraft cardboard, white cardboard, art paper, matte paper, two-side offset paper, carbonless copy paper, thermal paper etc.
Open/air cushion/hydraulic/water dilution/jet headbox
Wire section classification:fourdrinier,multi-layer wire section,twin-wire section,inclined wire section,cylinder section
Double roller press/multi-roller press,its function is to keep the original paper with a certain tension and moisture during dehydration,so that the paper is not easy to break and crack when entering the drying section.
The drying system of paper machine is composed of DCS thermal control system(single-cylinder or multi-cylinder),GCS steam condensation system,closed air hood and heat exchange ventilation system.
Paper machine chemical system+DCS control+GCS multi-stage gas supply system+QCS paper detection system+MCS drive control system
overfeed/underfeed rewinder
Technical parameters of art paper and coated white board paper production line | |
---|---|
Raw material | Waste paper,OCC,commercial wood pulp |
Paper kind | coated kraft paper,coated white board paper |
Paper width | 1880-6800 mm |
grammage range(GSM) | 100-450 g/m² |
Design speed | 100-850 m/min |
Working speed | 80-800 m/min |
Capacity | 50-600 T/D |
Transmission type | AC motor, frequency conversion drive |
Arrange type | single-layer layout,double-layer layout |